Poole Electricians Poole Electricians | Electrical Repairs in Poole
Powered by Powered by Go Assist
Same day or next day service
£No hidden costs
Fully insured
365 day guarantee*
Nationwide
Poole

EICR Cost in Poole

An Electrical Installation Condition Report (EICR) assesses the safety and condition of a property's fixed electrical installation, covering wiring, sockets, switches, consumer units and earthing arrangements.

Call us on 01202 000000 (placeholder - not in service)

EICR Cost

An Electrical Installation Condition Report (EICR) assesses the safety and condition of a property's fixed electrical installation, covering wiring, sockets, switches, consumer units and earthing arrangements. The cost of an EICR in Poole depends on several factors and is assessed individually for each property.

The main factors that affect cost are the size of the property, the number of electrical circuits, the number of consumer units or distribution boards, the age of the installation and the complexity of the wiring layout. A small flat with a single consumer unit will generally take less time to assess than a larger house with multiple circuits, additional outbuildings or an installation that dates from several decades ago.

Older installations often require more thorough testing because wiring methods and materials used at the time of installation may differ from those required under current standards. During the assessment, the engineer carries out a detailed visual inspection of accessible wiring and equipment, followed by a series of electrical tests on each circuit.

Observations are classified using standard codes. A C1 code indicates a condition presenting immediate danger that requires urgent attention before the installation is used.

A C2 code indicates a potentially dangerous condition that needs to be addressed. A C3 code indicates a recommended improvement that is not immediately dangerous.

An FI (Further Investigation) code means further investigation is required without delay. C1, C2 or FI observations make the report unsatisfactory; C3 alone does not.

The EICR is a separate document from any Electrical Installation Certificate issued for new installation or remedial work carried out after the assessment. If the report identifies work that needs to be done, the engineer will explain the findings and discuss next steps before any further work proceeds.

To request a cost assessment for an EICR in Poole, use the enquiry form on this site. An engineer covering your area will be in touch with further details.

Signs that an EICR may be needed sooner

⚠️

Persistent circuit tripping

Circuits that trip frequently or breakers that will not reset can indicate wiring faults or overloaded circuits. These symptoms suggest the installation should be assessed rather than simply reset.

⚠️

Scorch marks or discolouration

Marks around sockets, switches or the consumer unit suggest heat build-up, which may point to a loose connection or other fault within the installation.

⚠️

Old or obsolete consumer unit

A fuse board with rewirable fuses, cartridge fuses or older circuit breakers without RCD protection may not meet current safety standards and warrants a thorough condition assessment.

⚠️

Flickering or intermittent lighting

Lights that flicker, dim without explanation or cut out intermittently can indicate loose connections, poor earthing or circuit faults that an EICR can identify and classify.

How an EICR is carried out

1

Enquiry and appointment

Submit your property details using the enquiry form. An engineer covering the Poole area will be in touch to discuss the property and arrange a convenient time for the assessment.

2

Visual inspection

The engineer carries out a thorough visual check of all accessible wiring, consumer units, sockets, switches and earthing arrangements, noting any observations before testing begins.

3

Circuit testing

Each circuit is tested using calibrated instruments. Results are compared against the limits set out in BS 7671 (IET Wiring Regulations) and each observation is assigned the appropriate classification code.

4

Report and findings

The engineer produces the EICR, classifying each observation with the appropriate code. Any work identified as required is explained clearly and discussed with you before any further steps are agreed.

Common Questions

FAQs About EICR Cost

What does an EICR involve?
An EICR involves a visual inspection of accessible wiring, sockets, switches, consumer units and earthing arrangements, followed by electrical tests on each circuit. The engineer uses the results to classify any observations using standard codes and produces a formal condition report.
How often should an EICR be carried out?
For rented homes in England that fall within the regulations, the fixed installation must be inspected and tested at least every five years, or sooner if the report specifies it. A valid satisfactory report does not automatically need replacing at each new tenancy. Owner-occupied homes have no equivalent universal five-year landlord duty; a qualified inspector advises on an appropriate interval and earlier checks after damage, faults or substantial changes.
What do the C1, C2 and C3 codes on an EICR mean?
C1 indicates a condition presenting immediate danger, requiring urgent attention before the installation is used. C2 indicates a potentially dangerous condition that needs to be addressed promptly. C3 indicates a recommended improvement that is not immediately dangerous. FI means further investigation is required without delay. C1, C2 or FI makes the report unsatisfactory; C3 alone does not.
Is an EICR the same as an Electrical Installation Certificate?
No. An EICR assesses the condition of an existing fixed installation. An Electrical Installation Certificate is issued for new installation work, including new circuits and consumer unit replacements, to confirm that the work meets current standards. They are separate documents serving different purposes.
Are landlords required to have an EICR?
For tenancies covered by England's electrical safety regulations, private and social landlords must arrange fixed-installation inspection and testing at least every five years, or sooner if the report requires it. Required remedial or investigative work must be completed within 28 days or any shorter period specified in the report. Social tenancies granted before 1 December 2025 have transitional first-inspection provisions ending before 1 November 2026. Supply the inspection report to tenants as required and to the local council within seven days of its request. Following required remedial or investigative work, supply the tenant and local council with the report and written confirmation within 28 days of completion.
How should I prepare for an EICR?
Ensure the engineer can access the consumer unit and all electrical installations in the property, including loft space, outbuildings and any sub-distribution boards. Note any known faults or concerns. If remedial work has been carried out since the last EICR, locate any certificates issued for that work so the engineer can take them into account.

More Electrical Inspections & Testing services

EICRPAT TestingLandlord Electrical Certificate

Other services in Poole

🏠 Fuse Board / Consumer Unit Replacement ⚡ Rewiring 🔌 Lighting & Sockets 🏠 EV Charger Installation ⚡ Emergency Electrician

Areas

Electrical services in Poole TownElectrical services in HamworthyElectrical services in ParkstoneElectrical services in Canford HeathElectrical services in BroadstoneElectrical services in CreekmoorElectrical services in Lilliput

Get In Touch

Contact

Describe the problem and provide your contact details. Sending an enquiry does not confirm a booking.

01202 000000 (placeholder - not in service)
Use the enquiry form; the telephone number is a placeholder.
Service area: Poole.

Quick quote request

📞 Call Now 💬 Enquire